Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
OB41 White Grease Spray - 400ml 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
ALM Code 4 Milled Lead - 210mm x 6m 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Timco Blue Polypropylene Rope 8mm x 15m 
ALM Code 3 Milled Lead - 800mm x 6m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Code 7 Cast Lead - 1600mm x 6m 
Bond It AS900 Acoustic Sealant - White 900ml 
Uses
The A43 Threadlock Oil is perfect for securely binding various surfaces that are slightly oiled but not heavily oiled. This anaerobic adhesive will bind once it has lost direct contact with the air (oxygen) around it, making it perfect for supporting the strength of threaded screws.
Preparation
Before applying the glue, prepare the surface, and remove contaminants that can hinder the adhesion. This product works on slightly oiled surfaces but will work exceptionally better on clean surfaces.
Application
- Apply a sufficient amount of adhesive to coat the screw thread
- Screw the glued screw thread into the wall; once it has an exclusion from the air, it will begin to bond.Â
Bonding Times
These stats are based on a room temperature of 20°C
- Handling - < 15 Minutes
- Full Strength - 24 Hours
Limitations
A43 adhesive is designed for metal bonding; however, depending on the surface type can affect this product's suitability. Some surfaces require an activator, whilst others do not.
