Name: Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml
SKU: BDFIXG750
Availability: InStock

Quantity

Price

£8.99

2 - 5

£7.00

6 - 11

£4.83

12+

£5.17

Bond It's B3 Fill And Fix Expanding Foam Aerosol is a one-component polyurethane assembly foam, it is based on a moisture-curing polyurethane prepolymer. This product's foam does not shrink after curing, ensuring the risk of future deformation of joints and separation from the surface is kept to a minimum.

This product is compatible to be used most common building materials like wood, plaster, metal, stone, concrete, PVC and polystyrene. This product, however, doesn't stick to surfaces like polyethene, Teflon, silicone, oil, grease and similar substrates.

It is perfect to be applied the frames of doors and windows, filling holes and insulating penetration in areas. Other applications include sealing thermal acoustic insulation boards, connecting joints, and reducing the impact of thermal bridges.

Application

Prepare the areas that are going to be bonded. They must be firm, clean, dry and free from dust, grease or contaminants that can hinder adhesion. After that, get a spray bottle of water and spray area, ensuring it's well-moistened to encourage bonding.

Foam Gun: Hold the can in an upright position, using the other hand grab your foam gun and turn it onto the top of the can and screw it together. Make sure you secure it but be careful not to burst the top of the can.

When it's connected properly and you're ready to begin the application, turn the gun the right way up and begin to spray the filler working from bottom to top.

Note that the fresh foam will expand by 1½ to 2 times.

Additional information

Tack-Free (TM 1014)	6-10 minutes
Cutting Time	<30 minutes
Full Cure (Joint 3x5cm @ 23°C)	<8 hours
Curing Pressure (TM 1009, moistened surfaces)	<1kPa
Post Expansion (TM 1010)	<80%
Density In Joint (3x10cm; WGM106)	15-19Kg/m³
Dimensional Stability (TM 1004)	<1%
Temperature Resistance of Cured Foam	-50°C to +90°C
Working Temperature (Can, application surfaces)	+5°C to +30°C
Tensile Strength/Elongation (TM 1018, dry surfaces)	>80kPa/ 13%
Tensile Strength/Elongation (TM 1018, moist surfaces)	>60kPa/ 22%
Compressive Strength (TM 1011 moistened surfaces)	>5kPa
Shear Strength (TM 1012 moistened surfaces)	>20kPa
Thermal Conductivity (EN12667, TM 1020)	0.033W/(m K)
Sound Reduction Index Rst,w (EN ISO 10140)	62dB
Water Vapour Permeability (EN 12086)	<0.06 mg/(m h Pa)
Foam Yield (TM 1003) per 750ml can	37L
UN Class	1950 Aerosols, Flammable
UFI	KR80-Y030-300E-HKTM

Technical Data Sheet

Tack-Free (TM 1014)

6-10 minutes

Cutting Time

<30 minutes

Full Cure (Joint 3x5cm @ 23°C)

<8 hours

Curing Pressure (TM 1009, moistened surfaces)

<1kPa

Post Expansion (TM 1010)

<80%

Density In Joint (3x10cm; WGM106)

15-19Kg/m³

Dimensional Stability (TM 1004)

<1%

Temperature Resistance of Cured Foam

-50°C to +90°C

Working Temperature (Can, application surfaces)

+5°C to +30°C

Tensile Strength/Elongation (TM 1018, dry surfaces)

>80kPa/ 13%

Tensile Strength/Elongation (TM 1018, moist surfaces)

>60kPa/ 22%

Compressive Strength (TM 1011 moistened surfaces)

>5kPa

Shear Strength (TM 1012 moistened surfaces)

>20kPa

Thermal Conductivity (EN12667, TM 1020)

0.033W/(m K)

Sound Reduction Index Rst,w (EN ISO 10140)

62dB

Water Vapour Permeability (EN 12086)

<0.06 mg/(m h Pa)

Foam Yield (TM 1003) per 750ml can

37L

UN Class

1950 Aerosols, Flammable

UFI

KR80-Y030-300E-HKTM

FREE Next Working Day Delivery on Orders over £10*

Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml

Additional information

Technical Data Sheet

Product Information

Technical Data Sheet

Related Products

Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12)

Everbuild 701 Non-Slip Tile Adhesive – White 14kg

Bond It Barrier Tape Red and White - 70mm x 500M

Recommended products

Permavent Easy Slate 500 – Box of 100

Bond It Multi-Mate GP Silicone

Klober Uni-Plain Tile Vent, KG9918

Get new offers to your inbox.