£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml

Home Shop Sealants & Adhesives Glue and Adhesives Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml
Product SKU: LJACK5503
£6.99incl VAT.
£5.83excl VAT.
In Stock

Everbuild Lumberjack 550 Floor Adhesive is a premium, hybrid wood floor adhesive. It’s perfect for all types of wooden floors, delivering a solid bond to all common substrates.

  • Water-free formula, no concern for warpage or curl of wood
  • Permanently flexible, compensating for subfloor movement
  • Suitable to be used in conjunction with underfloor heating
  • Fantastic gap-filling properties for uneven surfaces
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Professional Sealant Gun - C3 (280ml - 310ml)
-
+
£7.99 Incl VAT £6.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
-
+
£5.99 Incl VAT £4.99 Excl VAT
Quantity Price
1 - 2 £6.99
3 - 5 £4.66
6 - 11 £3.81
12+ £3.56
Total Price
£6.99 Incl VAT
£5.83 Excl VAT

Uses

The Lumberjack 550 Floor Adhesive by Everbuild is an excellent hybrid polymer perfect for fixing all types of wood floors to common substrates. It's formulated with a water-free formula, preventing unwanted warpages or curls of the wood. With a versatile composite, it's suitable for application in underfloor heating, with suitability adhering wood to surfaces such as;

  • Concrete
  • Wood
  • Metal
  • Ceramic Tile
  • Vinyl
  • Marble
  • Granite
  • Most Natural Stones

Preparation

All surfaces must be free from contaminants such as dirt, dust, oil and grease. Any existing polish or wax must be removed, and all floors need to be sound; any new concrete must be allowed time to fully mature, and if you've got moisture in the suspended floor, you must treat this problem first.

Application

You must complete the installation and subfloor preparation in line with British standards.

  1. Cut the nozzle flat, leaving an opening of 8mm, then cut a V-shaped profile down into the nozzle at a depth of 10mm.
  2. Screw the nozzle onto the cartridge and place it into a standard sealant applicator tool.
  3. Apply the adhesive to the back of the plank in triangular-shaped beads, approx 8mm wide and 10mm high at ca. 250mm centres
  4. Position the surface into the application area whilst the adhesive is still tacky (30-minute open time)
  5. Tap it into its final position with mallet and block, removing any uncured adhesive present
  6. You should allow 12-24 hours before sanding or trafficking. You should allow three days in certain environments where the surface has little or no absorbency.

Limitations and Notes

  • Always check with the flooring manufacturer about any specific instructions or requirements relating to fitting the floor
  • Do not use the product against bitumen,
  • This product is not suitable for surfaces that bleed oils or plasticisers
  • Do not use, store or allow to cure below +5°C

Additional information

Product Type

Sealants & Adhesives

Chemical Base

STPE Hybrid Polymer

Colour

Buff

Density

1.53g/cm³

Shear Strength

>1.2N/mm2 (24 hrs) (wood/wood)

Consumption

One 300ml Cartridge will bond approximately 1m² of flooring when applied as directed.

Ambient Air Temperature

+5°C to +30°C

Curing Time

36-48 hours.

Tack Free Time

30 mins at 23°C and 50% RH

Temperature resistance

-40°C to +80°C

Trafficability/Sandability on new floors

24 hours after fixing

Viscosity

250,000 – 300,000 cP

Chemical resistance

Excellent

Humidity and water resistance

Excellent

Alkali resistance

Excellent

Technical Data Sheet

Safety Data Sheet

Product Information

Product Type

Sealants & Adhesives

Chemical Base

STPE Hybrid Polymer

Colour

Buff

Density

1.53g/cm³

Shear Strength

>1.2N/mm2 (24 hrs) (wood/wood)

Consumption

One 300ml Cartridge will bond approximately 1m² of flooring when applied as directed.

Ambient Air Temperature

+5°C to +30°C

Curing Time

36-48 hours.

Tack Free Time

30 mins at 23°C and 50% RH

Temperature resistance

-40°C to +80°C

Trafficability/Sandability on new floors

24 hours after fixing

Viscosity

250,000 – 300,000 cP

Chemical resistance

Excellent

Humidity and water resistance

Excellent

Alkali resistance

Excellent

Technical Data Sheet

Safety Data Sheet

Related Products