Everbuild Multi-Stick Adhesive - White 350ml 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
OX Pro 4 In 1 Heavy Duty Staple Gun 
ALM Code 8 Milled Lead - 300mm x 6m 
Siroflex Trade High Viscosity Superglue - 50g 
OX Trade XL Cuts All Tiles Diamond Blade 
Everbuild 102 Butyl Glazing Compound - Brown 2kg 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Timco Aluminium Hawk 
Code 3 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 850mm x 6m 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Code 7 Cast Lead - 510mm x 6m 
ALM Code 7 Milled Lead - 1000mm x 3m 
ALM Code 3 Milled Lead - 450mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Armatool Slate Rip - Stainless Steel 
Colron Refined Finishing Wax - 325g 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
