Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
OX Pro Impact Bit Set - 11 Piece 
Gorilla Heavy Duty Mounting Tape - Crystal Clear (25mm x 1.5m) 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
OX Pro Mini Round Point Shovel 
Armatool Flooring Kneepads 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
Thompson's Emergency Roof Seal - Black 2.5L 
ALM Code 3 Milled Lead - 800mm x 3m 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Klober Permo Ecovent - 1.1m x 50m 
Everbuild 501 PVA – 500ml 
FloPlast Half Round Union Unit - Black 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Code 7 Cast Lead - 760mm x 6m 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Soudal Cleaner & Degreaser - 400ml 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
Stanley Dynagrip Chisel Knife - 25mm 
Timco Round Wire Nails, Pack of 40 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
OX Pro Aluminium Metric Rafters Square - 300mm 
Code 5 Cast Lead - 760mm x 6m 
Everbuild ASBO Graffiti Remover - 400ml 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
