Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Timco Cloth Tape White - 50m x 48mm 
Code 6 Cast Lead - 360mm x 3m 
Bond It Glass Cleaner - Clear 1L 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Code 4 Cast Lead - 510mm x 6m 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Soudal Genius Gun Gap Filling Foam - 750ml 
Everbuild Stixall Extreme Power – White 290ml 
Timco Screwdriver 9-Tool Set 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
Code 5 Cast Lead - 390mm x 3m 
Bond It Mega Stik PU Adhesive - Beige 750ml 
FloPlast Half Round Downpipe 112° Bend, Black 
Code 8 Cast Lead - 150mm x 3m 
ALM Code 5 Milled Lead - 510mm x 6m 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
Cromar Vent 3 High Performance Breathable Membrane - 1m x 50m (Full Pallet of 54) 
ALM Code 4 Milled Lead - 1600mm x 3m 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Klober Double Pantile Vent - Slate Grey KG9858-3-0429 (Box of 10) 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
