Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Code 3 Cast Lead - 150mm x 3m 
Cromar Bitumen Primer – Black 1 Litre 
Bond It Squeezy Door and Frame Sealant - EU2 White 
Armatool Lead Dresser Set - 5 Piece Set 
Code 4 Cast Lead - 240mm x 3m 
Code 8 Cast Lead - 1200mm x 3m 
Everbuild EB25 Ultimate Sealant & Adhesive – White 300ml (Box of 12) 
ALM Code 8 Milled Lead - 600mm x 6m 
Soudal Genius Gun Gap Filling Foam - 750ml 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
ALM Code 5 Milled Lead - 800mm x 6m 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Soudal Orange Skeleton Gun - Up to 400ml 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Easy-Trim Universal Dry Verge System - Brown 
Timco Flat Wood Bit Set 
Bond It Dustproof & Hardener - Clear 5L 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Ronseal Precision Finish Brush - 5 Pack 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
