Code 3 Cast Lead - 760mm x 3m 
ALM Code 7 Milled Lead - 510mm x 6m 
Code 4 Cast Lead - 240mm x 6m 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
Bond It The Beast PU Adhesive - Brown 150ml 
Timco Flat Wood Bit 1/4" Extension Rod - 150mm 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Code 8 Cast Lead - 1000mm x 3m 
Timloc Non-Profile Tile Vent Grey (Box of 8) 
OX Tools Trade Bucket, Black - 15 Litre 
BORA - PM-4550 Adjustable Speedhorse XT (Set of 2) 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Stanley Dynagrip Chisel Knife - 25mm 
Code 5 Cast Lead - 510mm x 3m 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
OX Pro Dry Wall Hammer - 14 oz 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
FloPlast Square Line Gutter Angle 135° Black 
ALM Code 3 Milled Lead - 850mm x 3m 
Thompson's Water Seal - 5L 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Perfect for decorating purposes, Bond It Dec-Mate Decorative Chalk is ideal to use on wood, light fittings, stair risings, plaster, brick, concrete and plasterboards. Some surfaces require a primer to be put on before, the best way to check this is to try and test with a sample in a hidden area.
Note: Not recommended for external use or in wet areas.
Application
- Apply using a standard sealant gun.
- Cut the tip from the cartridge, and be careful not to damage the screw threat.
- Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed.
- Apply to the desired area, and be sure to use a sealant applicator tool, wetted spatula or sponge within 10 minutes to shape it before the skin begins to form.
