Bond It SBR Admixture - White 5L 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Everbuild Tarmac Restorer - 5 Litre 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Timloc Castellated Tile Vent Red (Box of 8) 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Soudal Orange Skeleton Gun - Up to 400ml 
Timloc Plain Tile Vent Red (Box of 14) 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Siroflex Trade High Viscosity Superglue - 20g 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Thompson's One Coat Damp Seal - White 2.5L 
Everbuild Resiblock Block Paving Sealer - Matt 5 Litre 
FloPlast Round Line Downpipe Clip, Black 
Easy-Trim Hip Support Tray Accessory Kit 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Easy-Trim Lead R Flashing Smooth – 300mm x 5m 
Soudal Degrip All Spray – 400ml 
Ronseal One Coat Stain Block - White 750ml 
Soudal Adhesive Remover - 400ml 
Bond It PVA & Adhesive Sealer - White 1L 
This Dustproof and Hardner from Bond It is exceptional at delivering a protective layer on concrete, offering endless protection to dust, as well as improved resistance to oils, grease and water.
Application
Prepare the surface you intend to use this product on, ensuring all oil, grease, paint, polish and other contaminants that can hinder this product are removed. Once removed, ensure the surface is clean and dry.
Prepare yourself with the appropriate PPE, equip gloves, boots and goggles. Making sure you wear them the entire time you're using this product.
- Apply uniformly and firmly to the surface, using a brush at a rate of 3-5m². Ensure you DO NOT overfill an area and create puddling.
- Allow the first coat to cure overnight.
- Apply a second coat the same way you applied the first coat.
- Please wait 24 hours and wash the floor with clean water OR Apply a third coat and wait another 24 hours to wash it off.
