Bond It Contractors PVA - 25L White 
Everbuild Stixall Extreme Power – White 290ml 
Code 5 Cast Lead - 390mm x 3m 
Bond It Paving & Patio Seal - Clear 25L 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 250ml 
ALM Code 3 Milled Lead - 510mm x 3m 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Timloc Underlay Felt Lap Vent 
Code 6 Cast Lead - 1200mm x 3m 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Code 8 Cast Lead - 360mm x 6m 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Formulated with reliability and performance in mind, the Bond It Felt Adhesive 25L is the go-to choice for tradesmen and D.I.Y enthusiasts. The black colour of the paint delivers a discreet, professional finish with a robust and long-lasting bond that can withstand a variety of weather conditions.
Preparation
All surfaces must be clean and dry. They must be free from grease, oil and loose material. Ensure to remove any organic growth using a fungicidal wash like MOULD STOP. Dusty and porous surfaces should be primed with BITUMEN PRIMER. If possible, the felt to be laid should be cut to size and positioned for 24 hours to assist with the application. To avoid thickening in cold weather, store the FELT ADHESIVE overnight in a warm room before use.
Application
- Use a brush, mop or squeegee when applying this product
- Apply it directly to the surface to be bonded
- Take note that coverage depends on how thick it's applied to the surface
