Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
Code 5 Cast Lead - 850mm x 6m 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Everbuild Fill & Skim - 5 Litre 
Timloc Standard Roof Tile Vent Adaptor 
Bond It Anchor Bond Applicator - Blue 400ml 
Everbuild Mortar & Tile Grout Pro Pointing Gun Kit 
Easy-Trim Eaves Comb Filler, 1m 
Code 6 Cast Lead - 360mm x 3m 
Everbuild 502 Wood Adhesive – 1 Litre 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Everbuild Multi-Use Wonder Wipes Tub (100 Wipes) 
Timco Skeleton Gun 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Bond It Mega Foam is a simple, easy to use one component polyurethane assembly foam, it's based on a moisture-curing polyurethane prepolymer. This unique formula delivers an expanding foam that never shrinks, preventing further deformation or disruption to its applied area.
This fresh foam adheres to all common building materials, some of these include; wood, stone, plaster, concrete, metal, PVC and polystyrene. However, the adhesive doesn't work well with polyethene, Teflon, silicone, oil, grease and similar substrates.
Application
- Before application, you need to ensure that all surfaces to be bonded are clean, dry, firm and free from contaminants that can hinder adhesion, like dust and grease.
- Once the area is checked for contaminants, moisten the application area with a water spray bottle.
- Hold the can in an upright position, with the other hand, connect the gun to the foam whilst maintaining the upright position on the can. When ready to use the foam gun for application, turn the gun back upright apply working from bottom to top.Fresh foam will expand to 1½ to 2 times, so ensure you do not overfill the joints. Any new foam that spills you must remove immediately.
