Everbuild Jumbo Mitre Fast Kit (Box of 6) 
OX Pro Electricians Chisel - 2¼" X 10" 
OX Pro Chalk Refill, Yellow – 226g 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Multi-Stick Adhesive - White 350ml 
ALM Code 6 Milled Lead Flashing - 180mm x 3m 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Klober Double Pantile Vent - Brown KG9858-3-0247 (Box of 10) 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
OB41 White Grease Spray - 400ml 
Code 6 Cast Lead - 600mm x 6m 
Code 5 Cast Lead - 210mm x 3m 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
ALM Code 3 Milled Lead - 510mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild Mitre Fast Activator – 200ml 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Everbuild Bath & Kitchen Sealant – White 290ml 
Armatool Longo Chalk Reel 30m & Fluorescent Chalk Orange 
Code 3 Cast Lead - 210mm x 6m 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
This Bond It Silicone Ultra Waterseal delivers impressive results preventing the ingress of rain and moisture into the wall, however, it does enable present water in the stone to evaporate from it, allowing your walls to be drier, warmer and help prevent future damages.
The uses of this product include being a general masonry waterproofer, suitable for application on brick, stone, concrete and unglazed tiles. Not only is water deflected and protected against, but also frost damage so that those cold winter months will have less of a toll on your building.
Application
Prepare all surfaces before application, this includes removing dirt, moss, lichen and any other organic growth that is present. If you find it challenging to remove particular organic growth, consider using Bond Its MOULD-STOP or PATIO-BLASTER as these are effective at eliminating these. If any fresh pointing is present, allow 24 hours for it to dry. All surfaces must be clean and dry before you start the application.
Do not use this product during rainfall, if rainfall is imminent, ensure you protect the are so it can cure properly. Do not apply this product on painted surfaces, however you can paint onto the surface after applying this product using breathable paints.
- Shake well before use.
- Apply using a low-pressure spray that isn't atomizing, or brush at a rate of 3m² per litre for porous stone and 5m² per litre for hard brick. Starting from the top and working your way down, making sure the surface is wetted well
- A second coat is required and should be applied when the masonry is still wet/tacky
