Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
Timco Cloth Tape White - 50m x 48mm 
Soudal 140 LQ Contact Adhesive – 5 Litre 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
OX Pro Harling Trowel - 165mm X 165mm 
Code 5 Cast Lead - 1600mm x 3m 
Timco Premium Dry Diamond Core Drill Kit 5pcs 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Everbuild KOS Black Fire Cement - 500g 
OX Pro Chalk Refill, White – 226g 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Ronseal Fence Life Brush - 4" 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
Everbuild Clear Fix – 290ml (Box of 12) 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
ALM Code 3 Milled Lead - 850mm x 6m 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
OX Pro Gauging Trowel - 7" / 180mm 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Bond It Patio Blaster - Clear 5L 
This Bond It Silicone Ultra Waterseal delivers impressive results preventing the ingress of rain and moisture into the wall, however, it does enable present water in the stone to evaporate from it, allowing your walls to be drier, warmer and help prevent future damages.
The uses of this product include being a general masonry waterproofer, suitable for application on brick, stone, concrete and unglazed tiles. Not only is water deflected and protected against, but also frost damage so that those cold winter months will have less of a toll on your building.
Application
Prepare all surfaces before application, this includes removing dirt, moss, lichen and any other organic growth that is present. If you find it challenging to remove particular organic growth, consider using Bond Its MOULD-STOP or PATIO-BLASTER as these are effective at eliminating these. If any fresh pointing is present, allow 24 hours for it to dry. All surfaces must be clean and dry before you start the application.
Do not use this product during rainfall, if rainfall is imminent, ensure you protect the are so it can cure properly. Do not apply this product on painted surfaces, however you can paint onto the surface after applying this product using breathable paints.
- Shake well before use.
- Apply using a low-pressure spray that isn't atomizing, or brush at a rate of 3m² per litre for porous stone and 5m² per litre for hard brick. Starting from the top and working your way down, making sure the surface is wetted well
- A second coat is required and should be applied when the masonry is still wet/tacky
