Everbuild Febond PVA - 5L 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
Timco Driver and Ground Jobber Bit Set 
Bond It Patio Blaster - Clear 2.5L 
ALM Code 8 Milled Lead - 150mm x 6m 
Klober Univeral Angle Ridge End - Grey 
ALM Code 7 Milled Lead - 1000mm x 6m 
ALM Code 3 Milled Lead - 150mm x 3m 
Eco-Shovel & Hard Brush Black Large Pan 
Timloc Rad-Seal Recessed 
Standard Brush 4-Inch 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
This Bond It Stabilising Solution is perfect for pre-treatment for old, weathered, chalky porous surfaces. Suitable to be used on most substrates, some of these include; cement, plaster, concrete, plasterboard, renders, pebbledash and MDF.
Application
Prepare all surfaces before application, ensuring that you remove all present debris or flaking material. Remove any mould and organic green growth present, you can use MOULD-STOP, PATIO-BLASTER or ORGANIC-CLEANER prior to application to eliminate and prevent further growth in that area.
Do not apply this product under 5°C, during rainfall or when frost is imminent. However, you can use this to damp substrates.
- Stir well before use
- Apply using a brush, roller or spray bottle (not atomised)
- You must wait 12 hours to dry
- A second coat me be required on surfaces that are porous or powdery
