Soudal Brake Cleaner - 400ml 
Freeflow 65mm Square Down Pipe Clip Standard - White 
Double Nylon Tool Pouch with Belt 
Klober Regent Tile Vent KG6084, Grey 
Ronseal Exterior Yacht Varnish - Satin 500ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Ronseal One Coat Stain Block - White 2.5L 
Soudal Construction Silicone, Grey - 290ml 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
ALM Code 5 Milled Lead - 300mm x 3m 
OX Pro Magnetic Level 600mm 
EVO-STIK Stick Like Sh*t - White 290ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Soudal Superglue Activator - 200ml 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Gorilla Tape - Black (48mm x 32m) 
Timco 25 Spanner Set 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
OX Pro Dry Wall Hammer - 14 oz 
Hambleside Danelaw Felt Lap Vent 
Everbuild Flue Jointing Compound - 1kg 
Everbuild KOS Fire Cement Buff – 2kg 
Bond It Organic Cleaner - Clear 2.5L 
How to Use
Fit the metal stand onto the front of the gun in the slots by the nozzle. Load a Bostik Handy Hot Melt Glue Stick through the grip ring at the rear of the gun. Press the trigger several times until the stick is firmly embedded in the gun. Plugin the gun and a light will come on at the rear to indicate that it is in operation. Rest the gun on its stand and allow it to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry. Press trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.
Unplug the gun when finished and allow it to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.
