Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Thompson's Water Seal - 2.5L 
Armatool Mop Heads Size 12 
Code 4 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 390mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Ronseal Expanding Foam Filler - 500ml 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It Trowel Mastic - Black 5L 
Timco 30mm Cladding Pin - 250 Pieces 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Soudal Fix ALL Turbo - White 290ml 
How to Use
Fit the metal stand onto the front of the gun in the slots by the nozzle. Load a Bostik Handy Hot Melt Glue Stick through the grip ring at the rear of the gun. Press the trigger several times until the stick is firmly embedded in the gun. Plugin the gun and a light will come on at the rear to indicate that it is in operation. Rest the gun on its stand and allow it to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry. Press trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.
Unplug the gun when finished and allow it to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.
