Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Thompson's Water Seal - 2.5L 
Armatool Mop Heads Size 12 
Code 4 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 390mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Ronseal Expanding Foam Filler - 500ml 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It Trowel Mastic - Black 5L 
Timco 30mm Cladding Pin - 250 Pieces 
Bond It Patio Blaster - Clear 2.5L 
The Refined Wood Dye by Colron is the ultimate wood dye choice compared to traditional solvent-based choices on the market. This product is carefully formulated to deliver all the benefits of conventional wood dyes without any discolouration or fading. You can apply this to hardwood or softwood, but it is only suitable for interior wooden furniture.
Preparation
The Refined Wood Dye shouldn't be applied onto previously treated surfaces. You should prepare the surface by removing any previous coating, regardless of what it is: oil, dye, etc. Use a sandpaper to sand down to the bare wood, then wipe any present dust away with a damp, lint-free cloth.
Application
- Shake the tin well for about 1 minute.
- Tip a small amount of the dye into a lint-free cloth or small piece of sponge.
- Apply to the wood, following the direction of the wood grain and working evenly.
- Two coats typically achieve optimal results, but you can apply further coats if you want to continue thickening the colour. You must give 1 hour of drying time between each coat.
- After finishing the application, you can either leave it there or seal it with a dedicated interior lacquer to protect the surface.
Aftercare
Any leftover dye shouldn't be emptied into watercourses or drains; you should contact your local authority to understand how to dispose of it safely. Any cloths or sponges used should be disposed of safely, as they can be flammable after being soaked in dye.
