Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Armatool Longo Chalk Reel 30m & Fluorescent Chalk Orange 
Bond It Mould Stop - Clear 1L 
Siroflex PVCu Trim & Mitre Cutter 
Code 3 Cast Lead - 600mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Ronseal 3 in 1 Basecoat - White 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixing - 10 Pieces 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
OX Pro Electricians Chisel - 2¼" X 10" 
Timloc Underlay Felt Lap Vent 
Soudal Silirub 2, White - 300ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Everbuild Mitre Fast Activator – 200ml 
FloPlast Universal Hopper, White – 65-68mm 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Armatool 30m Longo Chalk Line 
Bond It PVA & Adhesive Sealer - White 1L 
Samac Copper Wire Coil 36m x 2mm 
Universal Hip Support System Tray - 1.2m 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Uses
The Aluminum Paint by Cromar is an exceptional, high-performance roof coating that defends against the harmful effects caused by sunlight, reflecting UV rays away from the substrate below and extending the roof's lifespan. Cromar's aluminium paint can be applied directly to bituminous roofs, which is perfect for protecting them, whether it's roofing felt or bitumen paint. Other application areas include exposed steel, corrugated iron, and other metallic surfaces; even mineral surfaces, including concrete, are suitable.
Preparation
Before commencing the application, preparing the area is vital to achieve optimal and professional results. Start by cleaning the surface, removing contaminants that can hinder the adhesion of the paint, including dirt, dust, grease, oil, loose debris and even organic growth. A stiff brush is the best tool to clear the surface of impurities, but a fungicide is recommended for organic growth as it will kill them and prevent them from returning. Roofing felt should receive a primer, and then they're ready for the aluminium paint.
Application
- Any fresh bitumen coating on the roof must have 3 - 5 days of curing before applying the aluminium paint.
- Stir it thoroughly before use.
- Using a brush or airless spray, apply the first coat to the surface and allow it to dry.
- Once it's dried, apply the second coat to the surface.
- Take care not to apply either coat too thick; otherwise, bronzing may occur. Bronzing can also happen if rain falls before it's cured.
