ALM Code 5 Milled Lead - 240mm x 3m 
Bond It Pro-Mate LMA Silicone - White EU3 
Soudal Fix ALL Turbo - White 290ml (Box of 12) 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Sika MaxMix Waterproofer - 1 Litre 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
TIMCO Precision Screwdriver Bit Set -18 Pieces 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Bond It AS900 Acoustic Sealant - White 900ml 
Code 6 Cast Lead - 240mm x 6m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
Timco Collated Drywall Self Drilling Screws 
Ronseal Multi Purpose Smooth Finish Filler - 600g + 50% Free 
Everbuild Febond PVA - 5L 
Everbuild Black Jack 908 DPM – 5 Litre 
Standard Brush 2-Inch 
Timloc Castellated Tile Vent Red (Box of 8) 
ALM Code 4 Milled Lead - 210mm x 6m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Everbuild Clear Fix – 290ml 
ALM Code 3 Milled Lead - 180mm x 3m 
Bond It 30 Minute PU Wood Adhesive - Brown 750g 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Uses
The 401 Brick & Patio Cleaner by Everbuild is a potent, high-performance mortar and cement stain remover that acts quickly and effectively on most mineral surfaces. It utilises its solvent-free, acid-based formula, which combats any ingrained dirt or stains, leaving a clean stainless surface. Applications this product has typically been used in include;
- Cleaning stains from brickwork, concrete, stone and earthenware
- Cleans stains from patios and driveways
- Cleans garage and factory floors
Preparation
Before starting the application, slightly moisten the surface you intend to apply the 401 Brick & Patio Cleaner.
Application
- This product is ready-mixed and should not be diluted.
- Protect and mask any surfaces near you don't want to damage
- Any organic growth, plants, ponds, swimming pools, etc, must be protected.
- Apply to the surface by brush or spray, saturating and leaving it for 15 - 20 minutes.
- After the time has passed, use a hard, stiff bristle brush to remove the stain.
- Afterwards, wash down the area with water, ideally using a hose.
Limitations and Notes
- Ensure the container is kept upright position whilst storing or transporting it.
- Dispose of the product content or packaging appropriately, and contact your local council for advice.
- This product is crafted for exterior use; interior use isn't recommended and, if completed, is at the user's discretion.
- Always surfaces down after treatment.
- Protect plants, organic growth, ponds, swimming pools, and anything that can inadvertently harm life.
- Sensitive surfaces should have preliminary tests completed to ensure compatibility.
