£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre

Home Shop Roofing Accessories Bitumen Paint Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre
Product SKU: 90525
£79.19incl VAT.
£65.99excl VAT.
In Stock

The Everbuild Black Jack 905 All-Weather Roof Coating is the perfect solution for all your general-purpose waterproofing needs, with its easy-to-apply, brushable bitumen compound, utilising added fibres, achieving a formula impervious to water that can even bond roofing felt together.

  • Easy to apply, brushable formula
  • Fast-drying, fibre-reinforced composite
  • Suitable to bond roofing felt together
  • Weatherproof that’s unaffected by water immediately after application
Frequently Bought Together:
Standard Brush 4-Inch
-
+
£1.89 Incl VAT £1.58 Excl VAT
This image displays the front of the product which is a Ronseal Precision Finish Brush 5 Pack
-
+
£14.99 Incl VAT £12.49 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Total Price
£79.19 Incl VAT
£65.99 Excl VAT

Uses

The Black Jack 905 All-Weather Roof Coating by Everbuild is a high-quality, full-bodied, solvent-based, black, bituminous compound that offers the roof the ultimate protection, preventing unwanted leaks which can subsequently cause structural damage. It provides its waterproofing protection almost immediately upon application, allowing application even if rain is imminent. Application this product is typically applied include;

  • Asphalt roofs
  • Built-up felt roofs
  • Concrete Roof decks
  • Asbestos-Cement Sheeting
  • Metal Sheeting (Iron, Steel, Zinc, Lead)
  • Slate
  • Tiles

Preparation

The surface you're repairing must be stable, sound and free from contaminants that can hinder the product's performance; this includes organic growth, loose debris, dirt, dust, grease, etc. Any damaged area that is beyond remedial work must be replaced; no roofing coat product can repair an existing roof that isn't structurally sound or stable.

Application

The coverage of this product is dependent on the substrates it's applied on. Different roofs require different coats and thicknesses of the 905 Black Jack, so you should thoroughly read the technical data sheet to ensure you have a complete understanding.

  1. Dip the Brush into the 905 Black Jack
  2. Apply to the surface, ensuring thorough, even coverage.

Limitations and Notes

  • Do not apply this product to damp or wet surfaces.
  • This product should not be used in areas where contact with solvents is likely.
  • Do not use in silage pits.
  • Avoid inhaling the vapours when in confined spaces.
  • This product may bleed through any paints applied over it; contact the paint manufacturer to understand what primer must be applied to the 905 to allow compatibility with overpainting.

Additional information

Product Type

Roof Paint

Colour

Black

Density

ca. 1.0 g/cm3 at 20°C

Reaction to Fire

Wet product is flammable, dry film will burn

Chemical Resistance

Resistant to: most salt solutions, dilute acids and alkalis, water. Not resistant to: oils, solvents and some detergent solutions/glass cleaning solutions.

Service Temperature

-10°C to +85°C

Yield

1.25m² per litre per coat depending on porosity of substrate. Two coats should give a dried film of approximately 0.9mm.

Drying time

24 hours depending on drying conditions. Allow 24 hours between coats.

Type Of Solvent

White spirit

Application Temperature

5°C to 30°C. Surfaces must be free from ice and water

Heat Flow Resistance

The cured film will not sag or flow under normal conditions

Technical Data Sheet

Safety Data Sheet

Product Information

Product Type

Roof Paint

Colour

Black

Density

ca. 1.0 g/cm3 at 20°C

Reaction to Fire

Wet product is flammable, dry film will burn

Chemical Resistance

Resistant to: most salt solutions, dilute acids and alkalis, water. Not resistant to: oils, solvents and some detergent solutions/glass cleaning solutions.

Service Temperature

-10°C to +85°C

Yield

1.25m² per litre per coat depending on porosity of substrate. Two coats should give a dried film of approximately 0.9mm.

Drying time

24 hours depending on drying conditions. Allow 24 hours between coats.

Type Of Solvent

White spirit

Application Temperature

5°C to 30°C. Surfaces must be free from ice and water

Heat Flow Resistance

The cured film will not sag or flow under normal conditions

Technical Data Sheet

Safety Data Sheet

Related Products