Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Everbuild Stixall Extreme Power – Grey 290ml 
Everbuild 402 Waterseal – 25 Litre 
Armatool Mop Heads Size 12 
Soudal Grip All Solvent-Based - 290ml 
Code 7 Cast Lead - 450mm x 3m 
ALM Code 7 Milled Lead - 210mm x 3m 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
ALM Code 8 Milled Lead - 1600mm x 3m 
Right Hand Klober Contract Dry Verge Unit Grey 
Freeflow 112mm Gutter Internal Stop End - Black 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Code 5 Cast Lead - 914mm x 6m 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Everbuild Lead Mate Patination Oil – 1 Litre 
FloPlast Square 112° Offset Downpipe - White 
ALM Code 3 Milled Lead - 450mm x 6m 
Everbuild 402 Waterseal – 5 Litre 
Uses
This Everbuild All Purpose Ready Mixed Filler is essential for any D.I.Y enthusiast or Tradesman looking to repair various surfaces. This product dries to a smooth but tough, crack-resistant sandable finish, allowing you to perfectly repair a hole to a flush finish. This product is suitable for internal and external use, offering various areas of applications; this product is suitable for surfaces such as;
- Plaster
- Brick
- Wood
- Stone
- Render
Preparation
You must prepare all surfaces correctly to achieve a good key and optimal adhesion. Remove any dust, oil, dirt, grease or similar contaminants, cover any nail or screw heads with oil-based paint and allow to dry.
Application
- Stir well before use and apply directly from the tub into the filling area.
- This product can fill a gap with a maximum depth of 9mm. If you want to fill a more significant depth, apply in layers and allow 1 hour between each layer so it can fully cure.
Limitations
- Do not use to fill plastics or metals.
- This product is unsuitable to be applied when rain is imminent or within 5 hours of application.
- Do not apply in temperatures below 5°C.
- Not suitable for repairs in permanently wet areas
- Do not apply more than 9mm depth per application. (e.g. if the gap is 27mm deep, it will take 3 coats at 9mm depth each with an hour between each one)
