Uses
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml is an excellent mastic with outstanding adhesive properties. Enabling it to adhere to various surfaces. It works perfectly as a perimeter pointer internally and externally. With areas such as doors and windows being perfect application areas. One of the typical applications for this product is sealing composite sectional panels and low-movement vertical building joints.
Preparation
Prepare the surfaces before starting the application. Complete this by removing all dust, oil, grease and similar impurities that can hinder the adhesion. New concrete or mortar should be allowed adequate time to dry and mature.
Application
Cut the tip off the cartridge carefully to avoid damaging the threaded screw. Attach the nozzle to the cartridge and cut it at a 45° angle, creating an opening slightly wider than the gap you need to fill.
Load the cartridge into a standard sealant gun and apply firm, consistent pressure to extrude an even bead for optimal adhesion and a clean finish. Tool the bead immediately after application using a wetted spatula, wooden spoon, or applicator tool.
Limitations
-
Avoid using this product in areas exposed to solvents, petrol, or oils.
-
Allow fresh concrete or mortar to cure for 28 days to lower surface alkalinity.
-
Do not apply this product alongside bitumen or asphalt.
-
Avoid contact with marble, slate, or other sensitive natural stones, as staining may occur.
