£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Everflex 335 Construction Silicone - 295ml

Home Shop Sealants & Adhesives Glue and Adhesives Everbuild Everflex 335 Construction Silicone – 295ml
Product SKU: N/A
From:
£8.99incl VAT.
£7.49excl VAT.
In Stock

The Everbuild Everflex 335 Construction Silicone is a trade-quality, low-modulus construction silicone that offers extremely low dirt pick-up, achieving its curing speed faster than other low-modulus sealants.

  • Flexible with a movement accommodation of +/- 20%
  • Extremely low dirt pick-up
  • Anti-fungal properties that prevent mould growth
  • It creates a waterproof seal
Frequently Bought Together:
-
+
£6.99 Incl VAT £5.83 Excl VAT
-
+
£5.99 Incl VAT £4.99 Excl VAT
This image displays the front of the product which is a Everbuild Superflow Sealant Gun - C3 (290ml - 310ml)
-
+
£18.99 Incl VAT £15.83 Excl VAT
Frequently Bought Together:
-
+
£6.99 Incl VAT £5.83 Excl VAT
-
+
£5.99 Incl VAT £4.99 Excl VAT
This image displays the front of the product which is a Everbuild Superflow Sealant Gun - C3 (290ml - 310ml)
-
+
£18.99 Incl VAT £15.83 Excl VAT
Total Price
£8.99 Incl VAT
£7.49 Excl VAT

Uses

Everflex 335 Construction Silicone by Everbuild delivers outstanding adhesion to various construction surfaces. It is an exceptional product that creates a weather-tight bond that prevents water from entering, and it can be used on surfaces such as glass, aluminium and PVC, which most typical sealants won't adhere to. This product is the ideal choice for perimeter pointing on various surfaces around the internal and external areas of the building.

Preparations

Clean the surface before applying, and remove dirt, dust, oil, grease, and other impurities. If there is any flaking on the surface, old mastic or sealant, then you must remove this to prevent interference with the adhesion. Most surfaces won't need a primer; however, some might need one, and it is suggested that you test this product in a small area before completing the whole application.

Application

  1. Cut the top of the cartridge, taking care not to damage the threaded screw.
  2. Screw the nozzle onto the cartridge, and cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
  3. Using a standard sealant gun, apply a firm, even pressure onto the handle; this will guarantee an even bead.

Limitations

  • Do not apply this to surfaces that bleed oils, solvents or plasticisers.
  • This product isn't suitable for application in areas immersed in water.
  • Some compatibility problems may occur with some cPVC piping.

Additional information

Product Type

Sealants & Adhesives

Storage Conditions

Store in cool dry conditions between +5°C and 25°C

Density

~ 1 g/cm³

Shore A Hardness

15 (ASTM D2240)

Tensile Strength

1.5 Mpa ASTM D412 (die C)

Elongation at Break

600% ASTM D412 (die C)

Service Temperature

-40°C to + 150°C

Sag Flow

<2 mm ISO7390

Tack Free Time

30 mins

Tooling Time

10 mins

Application Time

250 g/minute (3.2mm orifice 6.3 bar pressure)

Technical Data Sheet

Safety Data Sheet

Product Information

Product Type

Sealants & Adhesives

Storage Conditions

Store in cool dry conditions between +5°C and 25°C

Density

~ 1 g/cm³

Shore A Hardness

15 (ASTM D2240)

Tensile Strength

1.5 Mpa ASTM D412 (die C)

Elongation at Break

600% ASTM D412 (die C)

Service Temperature

-40°C to + 150°C

Sag Flow

<2 mm ISO7390

Tack Free Time

30 mins

Tooling Time

10 mins

Application Time

250 g/minute (3.2mm orifice 6.3 bar pressure)

Technical Data Sheet

Safety Data Sheet

Related Products