FloPlast Half Round Downpipe Branch 67.5°, Black 
Code 3 Cast Lead - 210mm x 6m 
Timco Copper Disc Rivets 
Code 8 Cast Lead - 1000mm x 3m 
Soudal Fix ALL Turbo - Grey 290ml 
FloPlast Ogee Fascia Bracket, White 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Everbuild Fill & Skim - 5 Litre 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Bond It Trowel Mastic - Black 5L 
Code 5 Cast Lead - 760mm x 3m 
Bond It Anchor Bond Applicator - Blue 400ml 
Code 6 Cast Lead - 1200mm x 3m 
Freeflow Square Gutter System Gutter 135° Angle - White 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12) 
ALM Code 7 Milled Lead - 510mm x 3m 
Code 4 Cast Lead - 1000mm x 6m 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
