Timloc Non-Profile Tile Vent Brown (Box of 8) 
Bostik Express Cement Pointing Mortar Buff – 310ml 
Bond It Economy Sealant Gun - Blue 900ml 
ALM Code 3 Milled Lead - 1000mm x 6m 
Klober Universal Vent 125mm Adaptor - KG979000-1 
OB41 Electrical Contact Cleaner - 400ml 
Code 4 Cast Lead - 360mm x 6m 
Everbuild Exact Gap Foam - 750ml 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Klober Dry Ridge System, 6m (KR5200) 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Code 8 Cast Lead - 180mm x 3m 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Everbuild Stixall Extreme Power – Black 290ml 
Ronseal Precision Finish Brush - 1.5 Inch 
Bond It Contractors PVA - 2.5L White 
ALM Code 4 Milled Lead - 510mm x 3m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
OB41 Multi-Use Brake Cleaner - 400ml 
Klober Profile-Line Flat Tile Vent - Black KG9856-3-0450 (Box of 10) 
Bond It Anchor Bond Applicator - Blue 400ml 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Armatool Leather Pouch & Leather Belt 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
