Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Timco Professional Wire Strippers 
Soudal Sealant Remover – 400ml (Box of 12) 
Ronseal Quick Drying Smooth Finish Filler - 330g 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Timloc Non-Profile Tile Vent Red (Box of 8) 
OX Pro Brick Hammer - 24 oz 
Permavent Easy Slate 500 - Box of 100 
ALM Code 4 Milled Lead - 760mm x 6m 
Code 3 Cast Lead - 914mm x 6m 
Everbuild Triple Action Wood Treatment – 2.5 Litre 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
ALM Code 7 Milled Lead - 1000mm x 3m 
Code 4 Cast Lead - 600mm x 3m 
Ronseal One Coat Stain Block - White 750ml 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Everbuild 402 Waterseal – 25 Litre 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Terracotta (Box of 5) 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Uses
The Lead Mate by Everbuild is perfect for lead-based applications, with its exceptional compatibility with lead, general metals, and even cement. It's formulated with excellent flexibility, resistance to high and low temperatures and general weathering, making it perfect for external applications. Everbuild tested it and complied with European Standard EN15651, allowing this product to be suitable for facade interior and exterior and cold climates.
Preparation
You should prepare the surface before application; otherwise, you risk failing to achieve optimal results. Remove all contaminants on the surface that can interfere with the bonding; this includes dirt, dust, oil, grease, etc. Priming is typically not required, but in certain applications, it may be needed; if you are unsure, complete a preliminary test.
Application
- Cut the top of the cartridge, taking care not to damage the threading screw.
- Cut the nozzle at a 45° angle, with an opening to the required amount and place it into a standard applicator tool.
- Point the tip of the cartridge to the surface and squeeze the trigger, extruding the sealant.
- Smooth down the surface within 5 minutes of the application.
Read the Technical Data Sheet for full information about different applications.
Limitation and Notes
- Do not use this product in conjunction with bitumen, asphalt, neoprene and specific organic elastomers.
- This product is not suitable for application to surfaces that bleed oils, solvents, or plasticisers.
