Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
ALM Code 7 Milled Lead - 240mm x 6m 
Everbuild Forever White Silicone Sealant – 295ml 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Timco 25 Spanner Set 
Code 3 Cast Lead - 1600mm x 3m 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
ALM Code 4 Milled Lead - 510mm x 3m 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Bond It Bitumen Paint - Black 5L 
Timloc Inline Slate Vent Black (Box of 5) 
Timco M6 Zip-Fix Cavity Wall Fixing - 10 Pieces 
Code 8 Cast Lead - 180mm x 6m 
Bond It Trowel Mastic - Black 2.5L 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Code 4 Cast Lead - 240mm x 6m 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
ALM Code 5 Milled Lead - 360mm x 6m 
Everbuild Lumberjack® Woodworm Killer - Clear 5L 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Lead Sheet Cleaner - 1 Litre 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Code 6 Cast Lead - 850mm x 6m 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
The Filler Coat by Everbuild is a high-quality, unique product used to seal over previous fillers and hairline cracks, delivering a key ideal for subsequent decorating. It's delivered in a ready-to-use tub that is applied through a simple pile-roller application. It's ideal for covering intense colours and, therefore, perfect for transforming rooms from a bright pink to a bright blue.
Preparation
Prepare the area to achieve optimal results. Start by ensuring the surface is sound, stable and free from contaminants such as dirt, dust, oil, grease, loose debris, etc. Glossy surface must be sanded and cleaned with a sugar soap before applying.
Application
- Stir the Filler Coat well before use
- Touch in corners using a brush, whilst, with open areas, you can use a pile-roller. Try not to overspread.
- Leave the surface to dry for at least 4 - 6 hours; please note it may take longer if the temperatures are cold.
Limitations and Notes
- Do not apply in temperatures below 10°C
- This should not be applied to heated surfaces
- This product will fill small imperfections on a surface, but it will not fill significant gaps.
- Very porous and powdery surfaces must be primed before painting
- New plaster must be primed and fully dry before applying the filler coat
- Do not use in contact with bitumen.
