Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Klober Universal Tile Vent Terracotta KG9854 (Box of 10) 
Bond It AS900 Acoustic Sealant - White 900ml 
OX Pro Double Handle Pool Trowel 
ALM Code 5 Milled Lead - 1600mm x 3m 
Everbuild PVCu Acti-Spray – Clear 200ml 
ALM Code 8 Milled Lead - 800mm x 6m 
FloPlast Round Line Downpipe Clip, Brown 
10 x Permavent Black Breather Membrane – 1m x 50m 
ALM Code 7 Milled Lead - 760mm x 3m 
Stanley Heavy-Duty Scraper - 75mm 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Code 7 Cast Lead - 210mm x 3m 
Code 5 Cast Lead - 450mm x 6m 
Code 6 Cast Lead - 300mm x 6m 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
FloPlast Square Line External Stop End Black – 114mm 
ALM Code 3 Milled Lead - 360mm x 6m 
Everbuild 404 Fungicidal Wash – 5 Litre 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Uses
The Forever Range by Everbuild is a high-quality mould shield product that can achieve up to 10 years of life without any signs of organic growth, including mould, mildew, or bacteria. It's perfect for application areas that suffer from high humidity levels, achieved by its ability to resist water and organic growth. Overall, it's a highly flexible bond that won't suffer from deteriorating for decades to come. Application this product is typically applied in include;
- Sealing baths, showers, wetrooms, sanitary ware, kitchens, ceramic tiles and all application areas of high humidity or areas that demand hygiene protection
- Sealing around window and door frames internally, which are subject to high levels of condensation
Preparation
Before commencing the application, preparing the substrates is vital to ensure you achieve optimal results. Clean the surface by removing contaminants that can interfere with the adhesion, including dirt, oil, grease, dust, etc. Deep gaps should have an expanding foam applied to prevent wasting the sealant. If you're using this product for plastic or acrylic baths, fill it half full with water during the sealing and curing process; this will allow it to accommodate being full and empty.
Application
- Start by cutting the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to be filled.
- Point the tip of the nozzle to one end of the gap and apply one singular bead along the whole surface. (Note: you can use masking tape to help prevent you from making a mess)
- After applying the sealant, tool it down within 15 minutes before the skin starts to form.
Limitations and Notes
- This product is not suitable for application on surfaces that bleed oils or plasticisers
- Do not apply this on substrates or areas that are bitumen/pitched-based
