Code 6 Cast Lead - 360mm x 3m 
ALM Code 3 Milled Lead - 360mm x 6m 
Soudal 5 Minute D4 Wood Adhesive Gel - 290ml (Box of 12) 
Code 5 Cast Lead - 360mm x 3m 
Everbuild Gun A Nail Standard – White 310ml 
Code 3 Cast Lead - 600mm x 3m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Antique Red (Box of 5) 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Everbuild PVCu Solvent Cleaner – 1 Litre 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Everbuild Febond PVA - 2.5L 
Klober Thin Line Vent - Slate Grey KG9855-3-0429 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 150mm x 3m 
12 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Code 4 Cast Lead - 150mm x 3m 
FloPlast Half Round External Stop End, Black – 112mm 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
FloPlast FloGuard Gutter Guard - 5m (10 x 500mm) 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
