Code 5 Cast Lead - 180mm x 3m 
ALM Code 5 Milled Lead - 760mm x 6m 
Everbuild Mammoth Clear Weatherproof Tape 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Soudal Degrip All Spray – 300ml 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Timloc Inline Slate Vent Black 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
