OX Trade Metric Tape Measure - 8m 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Everbuild One Strike Filler - White 5L 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Code 3 Cast Lead - 240mm x 6m 
ALM Code 4 Milled Lead - 240mm x 3m 
OX Trade Claw Hammer - 20 oz 
Soudal Lead Sheet Sealant 290ml - Grey 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
OX Pro Mini Square Mouth Shovel 
Timco Chalk Line Set 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Code 5 Cast Lead - 300mm x 6m 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Soudal Degrip All Spray – 300ml 
Everbuild Mitre Fast Activator – 200ml 
OX Pro Chalk Refill, Yellow – 226g 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
