Siroflex Trade Strength Medium Viscosity Superglue - 20g 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Everbuild Febond PVA - 5L 
Soudal PVCu Cream Cleaner - 1L 
Code 4 Cast Lead - 600mm x 3m 
Bond It Gripbond Pro Max Adhesive - White EU3 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
OX Trade 14 Drive Socket Set - 35 Piece 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Code 6 Cast Lead - 390mm x 3m 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Timco Copper Slate Straps 
Soudal Trade Sanitary Silicone - White 290ml 
Code 5 Cast Lead - 1600mm x 3m 
Timloc Eaves Comb Filler 1m 
Bond It Trowel Mastic - Black 2.5L 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
