OB41 Cut Tap Drill Fluid - 400ml 
Everbuild 703 Fix & Grout Tile Adhesive - White 750g 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Klober Double Roman Roof Tile Vent - Slate Grey KG9857-3-0429 (Box of 10) 
Soudal Fix ALL Turbo - Black 290ml 
Code 5 Cast Lead - 210mm x 6m 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
FloPlast Half Round Gutter Union, Brown 
Thompson's One Coat Damp Seal - White 250ml 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Cromar Bitumen Primer – Black 2.5 Litre 
ALM Code 3 Milled Lead - 180mm x 3m 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Bond It Mould Stop - Clear 1L 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Soudal Sealant Remover – 400ml 
FloPlast Square Fascia Bracket White – 114mm 
Lead Flexi Slate Pipe Flashing - Flat 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
ALM Code 4 Milled Lead - 914mm x 3m 
Bond It Mirror Pro Adhesive - White EU3 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 750ml 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
