Bond It Drive Alive Tarmac Restorer - 4 Litres 
FloPlast Square Line Offset Bend 112.5° Black – 65mm 
Copper Coil 20m x 50mm 
ALM Code 5 Milled Lead - 300mm x 3m 
Hedgehog Gutterbrush Clips (Pack of 20) 
ALM Code 3 Milled Lead - 180mm x 6m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Code 7 Cast Lead - 390mm x 6m 
Klober Boll Roll Tile Vent KG6085, Brown 
SikaBond Waterproof PVA – 5 Litre 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Freeflow 68mm Round Down Pipe Shoe - White 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - Black 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
