Code 6 Cast Lead - 450mm x 6m 
Code 5 Cast Lead - 390mm x 6m 
Everbuild Mitre Fast Activator – 200ml 
ALM Code 4 Milled Lead - 360mm x 3m 
Everbuild Anchorset Green 300 - Grey 300ml 
Soudal Grip ALL Solvent-Free - White 290ml (Box of 12) 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
OB41 High Performance Carburettor Cleaner - 400ml 
Code 3 Cast Lead - 914mm x 3m 
Bond It Heavy Duty Gun Foam Applicator 
Soudal Soudafoam Window & Door Gun Grade – 750ml 
Soudal PVCu Solvent Frame Cleaner - 1L 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Everbuild PVCu Solvent Cleaner – 1 Litre 
Everbuild Caulk Once – White 295ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
