Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
Soudal Grip All Solvent-Based - 290ml 
ALM Code 7 Milled Lead - 300mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey (Box of 12) 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Everbuild 405 Path & Patio Seal – 5 Litre 
Code 4 Cast Lead - 760mm x 6m 
Code 3 Cast Lead - 1600mm x 6m 
Evo-Stik Seriously Strong Stuff Fast Setting Adhesive, White - 290ml 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Everflex Galva Mate Duct Sealant - C3 
Permavent Easy Slate 600 - Box of 100 
Timco Flat Wood Bit Set 
Timco FirmaHold Brad Austenitic Stainless Steel Nails - 16G x 50mm (Qty 2000) 
Siroflex Trade Superglue Activator Spray - 200ml 
Evo-Stik 528 Instant Contact Adhesive – 1 Litre 
Siroflex Trade High Viscosity Superglue - 20g 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
