ALM Code 8 Milled Lead - 150mm x 6m 
Klober Boll Roll Tile Vent KG6085, Brown 
Sika 1 Waterproofer – 5 Litre 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Soudal Silirub 2, White - 300ml 
Lead Flexi Slate Pipe Flashing - Flat 
Ronseal Precision Finish Brush - 0.5 Inch 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild KOS Fire Cement Buff – 500g 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
OX Pro 6 Piece Bricklayers Set 
OX Trade XL Cuts All Tiles Diamond Blade 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
