Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
ALM Code 4 Milled Lead - 850mm x 3m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Soudal Sealant Remover – 400ml 
FloPlast Half Round Fascia Bracket, White – 112mm 
Timloc Standard Roof Tile Vent Adaptor 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Cromar Black Bitumen Paint – 2.5 Litre 
Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild Overlap & Border Adhesive - White 250g 
Timloc Universal Slate Roof Vent PVC Pipe Only 
ALM Code 7 Milled Lead - 850mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Bond It PVA & Adhesive Sealer - White 5L 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Everbuild KOS Fire Cement Buff – 1kg 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
