OX Trade Hard Green Carpenters Pencils – Pack of 10 
OX Pro 20oz Forged Steel Hatchet 
OX Trade 14 Drive Socket Set - 35 Piece 
ALM Code 7 Milled Lead - 510mm x 3m 
Sika Dustproofer – Clear 5 Litre 
Code 6 Cast Lead - 210mm x 6m 
Everbuild 405 Path & Patio Seal – 25 Litre 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Timco Screwdriver 6-Tool Set 
FloPlast Square Line Stop End Outlet White – 114mm x 65mm 
Everbuild Griptite Construction Adhesive - 350ml 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
OX Pro Tuff Spirit Level - 600mm 
ALM Code 4 Milled Lead - 210mm x 3m 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
Soudal Adhesive Remover - 400ml 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
