Bond It A43 Threadlock Oil Tolerant Adhesive - 50ml Blue 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Everbuild KOS Fire Cement Buff – 1kg 
Everbuild Stixall Extreme Power – White 290ml 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Klober Univeral Angle Ridge End - Grey 
FloPlast Half Round Fascia Bracket, Black – 112mm 
ALM Code 7 Milled Lead - 510mm x 3m 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Everbuild 501 PVA - 2.5 Litre 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Everbuild P13 Plumbers Putty - Beige 750g 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
