Bond It PVA & Adhesive Sealer - White 500ml 
Ronseal Quick Drying Smooth Finish Filler - 330g 
FloPlast Square Line Pipe Connector Black 
ALM Code 7 Milled Lead - 760mm x 6m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Restec CSM Fibreglass Roll 450g/m² - (30m² Roll) 
Code 7 Cast Lead - 240mm x 3m 
Everbuild Multi-Stick Adhesive - White 350ml 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Bond It Trowel Mastic - Black 2.5L 
OX Pro Magnetic Level 600mm 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
ALM Code 4 Milled Lead - 360mm x 6m 
Lead Hall Fixing Clips - Pack of 50 
Timco Impact Driver Bit Set 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Uses
The Lead Mate Patination Oil by Everbuild is perfect for lead workers or D.I.Yers installing lead themself. Everbuild formulated this product to deliver exceptional protection and extend the lead life, ensuring a visually pleasing look. It combats carbonate staining and aids the natural patine of the lead so it can be formed.
Preparation
- You must always wear gloves when applying this product and ensure you're in a well-ventilated area. Surfaces must be totally dry before application.
- Application
- Using a soft, absorbent cloth, apply the oil evenly, working horizontally, starting at the top and maintaining a wet edge at all times.
- You should not apply this product in a circular motion; this will leave an impression on the lead.
- Only apply one coat to the surface before clipping the underside of the lead; apply the patination oil approximately 50mm from the edge.
- Apply to all areas, including trims, clips and coats between laps.
Limitations and Notes
- Do not allow this product to come into contact with either bitumen or polycarbonate sheets
- Always test a small, inconspicuous area before completing the entire application
