Everbuild Showerproof Bathroom Silicone – White 280ml (Box of 12) 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Bond It Dustproof & Hardener - Clear 5L 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Freeflow 68mm Round Down Pipe Shoe - Black 
Bond It Sealant Applicator Tool 
Soudal Butyrub Non-Setting Mastic - Grey 300ml (Box of 12) 
OX Pro 20oz Forged Steel Hatchet 
ALM Code 8 Milled Lead - 1200mm x 3m 
Everbuild Flue Jointing Compound - 1kg 
ALM Code 4 Milled Lead - 800mm x 6m 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Gorilla Tape - Black (48mm x 32m) 
Everbuild PVC Hazard Tape - Red/White (50mm x 33m) 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Freeflow 112mm Gutter Internal Stop End - Black 
Bond It Paving & Patio Seal - Clear 25L 
Code 7 Cast Lead - 760mm x 6m 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Soudal Superglue Activator - 200ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
