Ronseal's EGC Hardener BPO - 30g 
ALM Code 8 Milled Lead - 510mm x 6m 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Everbuild Filler Coat – White 5 Litre 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Everbuild 405 Path & Patio Seal – 25 Litre 
OX Pro Small Trowel - 200 x 75mm 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Oxyturbo Maxy Gas Refill 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Everbuild P45 Foam Applicator Gun 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
ALM Code 5 Milled Lead - 510mm x 6m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Lead Sheet Cleaner - 1 Litre 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Uses
The Salt-Away by Everbuild is a unique, high-quality formula that combats unsightly marks left when salt evaporates from surfaces, leaving white marks and efflorescence. It's formulated using a special, non-hydrochloric acid, which is safer to handle and for organic life.
Issues that can occur if you leave this untreated can lead to corrosive damage and structural damage to some surfaces.
Preparation
Use a stiff brush to wipe the surface, removing any surface dirt or debris.
Application
- Dampen the surface you intend to apply this to
- Apply the Salt-Away to the surface, ensuring that you apply thorough, even coverage.
- Allow it to sit on the surface for 5-10 minutes, depending on levels of efflorescence.
- Wash the surface down thoroughly using clean water
- If the efflorescence is still present, repeat the application
Limitations
- Always test in a small, inconspicuous area to ensure surface compatibility.
- Do not use on artificially coloured stone, pavers or blocks.
- Any accidents, spillages or oversprays must be washed off immediately using clean water.
