Bond It Mega Stik PU Adhesive - Beige 750ml 
Ulti-Mate Sandtoft Rivius Charcoal Roof Vent Tile 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
ALM Code 3 Milled Lead - 240mm x 3m 
Siroflex PVCu Trim & Mitre Cutter 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
FloPlast Square Line Shoe White – 65mm 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Code 3 Cast Lead - 850mm x 6m 
ALM Code 8 Milled Lead - 914mm x 6m 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
Code 6 Cast Lead - 800mm x 6m 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
Ulti-Mate 10K Slate Vent Adaptor 
FloPlast Round Line Downpipe Clip, Black 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Irwin Jack Plus 880 Universal Handsaw - 20" 
Everbuild Lead Mate Patination Oil – 500ml 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Uses
The Silicone Eater by Everbuild is an exceptionally powerful and handy product for removing old silicone-based sealants. This product is formulated using robust polymers that combat the silicone composite, deconstructing them and allowing easily water-based clean-up to remove them entirely. This product is suitable for various surfaces, with some proving more compatible than others, so a preliminary test is always recommended.
Preparation
Start by cleaning the surfaces, removing any impurities that can hinder this product's abilities, which include dust. After removing contaminants, strip and remove as much sealant as possible and then protect surrounding areas with impervious masking tape.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and screw it onto the cartridge.
- Place the cartridge into a compatible sealant applicator tool.
- Extrude the material onto the sealant, allowing 2-4 hours for it to de-bond it.
- Four hours is the maximum it can sit on the sealant, so at the 4-hour mark, wipe it all away; if there is a left-over sealant, apply it again.
Limitation and Notes
- Complete a preliminary compatibility test before commencing the full application
- This product has a powerful composite, which can harm sensitive surfaces.
