Everbuild Clear Fix – 290ml 
Soudal Multi Cleaner - 400ml 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
Lead Sheet Restorer - G3 
Klober Uni-Line Flexipipe Soil Pipe 100/100mm 4" - (KG979900) 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
Code 8 Cast Lead - 360mm x 3m 
ALM Code 7 Milled Lead - 360mm x 3m 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Code 5 Cast Lead - 450mm x 6m 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
ALM Code 5 Milled Lead - 180mm x 6m 
Soudal Grip ALL Solvent-Free - White 290ml (Box of 12) 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Everbuild Industrial Superglue HV – Clear 20g 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Thompson's Water Seal - 2.5L 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
FrogTape® Multi-Surface Masking Tape - Green 36mm x 41.1m 
ALM Code 3 Milled Lead - 800mm x 6m 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Uses
The Silicone Eater by Everbuild is an exceptionally powerful and handy product for removing old silicone-based sealants. This product is formulated using robust polymers that combat the silicone composite, deconstructing them and allowing easily water-based clean-up to remove them entirely. This product is suitable for various surfaces, with some proving more compatible than others, so a preliminary test is always recommended.
Preparation
Start by cleaning the surfaces, removing any impurities that can hinder this product's abilities, which include dust. After removing contaminants, strip and remove as much sealant as possible and then protect surrounding areas with impervious masking tape.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and screw it onto the cartridge.
- Place the cartridge into a compatible sealant applicator tool.
- Extrude the material onto the sealant, allowing 2-4 hours for it to de-bond it.
- Four hours is the maximum it can sit on the sealant, so at the 4-hour mark, wipe it all away; if there is a left-over sealant, apply it again.
Limitation and Notes
- Complete a preliminary compatibility test before commencing the full application
- This product has a powerful composite, which can harm sensitive surfaces.
