Timloc Inline Slate Vent Black (Box of 5) 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
Everbuild Evercryl One Coat Grey – 20kg 
Timco Lithium EP2 Grease - 400g 
Soudal Superglue Activator - 200ml (Box of 12) 
Code 5 Cast Lead - 390mm x 6m 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Soudal Repair Express Plaster - White 250ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
OX Pro Chalk Refill, Blue - 226g 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Soudafoam Window & Door Hand Held - 750ml 
Code 3 Cast Lead - 510mm x 3m 
ALM Code 5 Milled Lead - 760mm x 3m 
Everbuild Mitre Fast Activator – 200ml 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
