Bond It Stain Block - 400ml Off White 
Code 3 Cast Lead - 760mm x 6m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
ALM Code 7 Milled Lead - 1600mm x 6m 
ALM Code 5 Milled Lead - 210mm x 6m 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
Bond It No Crack Caulk - White 310ml 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
Code 8 Cast Lead - 510mm x 6m 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Soudal Genius Gun Gap Filling Foam - 750ml 
Timco Screwdriver 6-Tool Set 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Siroflex Painters Caulk-It - 310ml 
Permavent Black Breather Membrane – 1m x 50m 
Code 4 Cast Lead - 1000mm x 6m 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
OX Trade Tile Cleaner 120 x 250mm 
Siroflex Trade Strength Glue Screws SF Adhesive 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Code 7 Cast Lead - 300mm x 3m 
ALM Code 8 Milled Lead - 360mm x 3m 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Ronseal Diamond Hard Floor Varnish - Clear Satin 5L 
Soudal Pro 45P Superfast Wood Glue - 750g 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
Unscrew the cap of the product
Squeeze the product to one surface only
Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
