Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Soudal Silirub 2, White - 300ml 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Code 5 Cast Lead - 760mm x 3m 
Code 7 Cast Lead - 510mm x 6m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Siroflex Contractors PVCu Silicone - Clear 300ml 
Right Hand Klober Contract Dry Verge Unit Brown 
ALM Code 4 Milled Lead - 150mm x 6m 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Code 3 Cast Lead - 760mm x 3m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml (Box of 12) 
Bond It Duct Tape - Silver 48mm x 45M 
Bond It Mould Stop - Clear 1L 
ALM Code 3 Milled Lead - 914mm x 6m 
Timloc Double Pantile Tile Vent Terracotta (Box of 6) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
