84 x ERidge Dry Fix Ridge System Black – 6m Kit 
ALM Code 8 Milled Lead - 150mm x 6m 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
OX Polyzip™ Flex C1 Cutter - 15mm to 28mm 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Code 3 Cast Lead - 180mm x 6m 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Samac Hall Hooks - (Bags of 10) 
Soudal Silirub 2, White - 300ml 
ALM Code 4 Milled Lead - 450mm x 6m 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Everbuild Showerproof Bathroom Silicone – White 280ml 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
OX TOOLTREK Trade Wheeled Tool Storage System 3 Pieces 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Klober Regent Tile Vent KG6084, Grey 
Timco Blue Polypropylene Rope 8mm x 15m 
IKO Super Shed Felt - Black 8m Roll 
ALM Code 6 Milled Lead Flashing - 1600mm x 3m 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Everbuild Black Jack 908 DPM – 5 Litre 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
FloPlast Half Round Gutter 135° - White 
FloPlast Square Line Internal Stop End Black – 114mm 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Everbuild 404 Fungicidal Wash – 5 Litre 
The Evercryl by Everbuild is one of the sought-after products on the market. It delivers one of the best waterproofing coats available, instantly activating as soon as it's applied to the surface. Evercryl uses fibres inside its formula, offering bridge-filling properties that repair slight tears in roofing felt and hairline cracks in gutters. All of this is achieved in just one coat, which allows quick application and gives confidence that it's sealed and waterproof. Surfaces that this roof coat can be applied onto include;
- Concrete
- Fibre/cement
- Roofing felt
- Mastic Asphalt
- Bituminous roof coatings
- Rigid PVCu corrugated iron
- Metal
- Slate
- Brickwork
- Tiles
- Lead
- Copper
- Zinc
- Plastic Gutters
- Metal Gutters
Preparation
Before commencing the application, you must check the surface. You must remove contaminants on the surface, including impurities such as dirt, dust, grease, organic growth and debris. You can remove this from the surface using a stiff bristle brush, and organic growth can be eliminated using a dedicated cleaner. Any rust on surfaces needs to be treated as well; this is achieved using a rust-inhibitive primer. All non-bituminous, porous or friable surfaces should be primed before application to allow the Evercryl to adhere correctly. Finally, any severe damage to tiles, slates, sheets or other forms of covering must be replaced. The Everycryl can fill small cracks and damages; however, it's not capable of fixing broken tiles.
Application
- Stir thoroughly before using, ensuring all the pigment is mixed
- Using a brush, apply one coat at a rate of 1-2 litres per square metre
- In certain cases, you may need a second coat, which should be applied 2-3 days after the initial coat.
Limitations
- This product should not be applied in areas where subsequent solvent or oil contact is likely.
- Avoid inhaling any of the vapours
- Do not apply to Styrofoam or PVC foil
