Uses
Stick2 Hard Plastic Adhesive by Everbuild is excellent at adhering to various types of plastics and synthetics together. It attaches to surfaces such as;
- PVC
- Acrylic
- Polycarbonate
- Abs
- Rigid PVC
These are just a few distinctive surfaces that it can adhere to; the typical application found with this product includes;
- PVC Guttering Repairs
- General PVC Bonding
- ABS non-pressure pipework
- General repairs to;
- Hairdryers
- Refrigerator doors
- Irons
- Vacuum cleaners
- Plastic toys
- Record Players
- AV Equipment
Preparation
Ensure that you properly prepare the surface before starting the application, and remove any present contaminants like dust and dirt which can hinder this product's adhesion.
Application
Always use this product over a protected surface, and use this product in a well-ventilated area.
- Remove the cap and pierce the inner membrane, apply a thin, even layer of adhesive to both surfaces and assemble immediately.
- Reposition either surface within the first 10 minutes of application,
Full strength is achieved after 24 hours at a temperature of 20°C. After you finish your application, screw the cap back on top.
Limitations
- This product will not stick polyethene, polypropylene, polystyrene, PTFE, nylon or bakelite
- This product should not be used near polish or certain painted surfaces
- This product is not suitable for areas in constant water immersion
- Do not use this product on bitumen, asphalt, or cellulose-panted surfaces
- Do not use it as a mirror adhesive, as this product may attack the mirror backing
- Do not use this product below 5°C
